Dimensions of ISEJ 60 Kg to Drg No. RT-6902 Alt-2

DIMENSIONAL REPORT OF IMPROVED SEJ 60 Kg to Drg No. RDSO/T-6902 Alt-2



Sl. No.

Parameters

1

Length of Tongue Rail  6780 mm 
(±3 mm)

2

Length of Stock Rail 6180 mm (±3 mm)

3

Length of Gap Avoiding Rail Right 2380
mm (±1 mm)

4

Length of Check Rail 2700 mm (±5 mm)

5

Overall Length 13,000 mm (±6 mm)

6

Head width of machined Tongue Rail 45 mm
(±0.5 mm)

7

Head width of machined Gap avoiding 46
mm (±0.5 mm)

8

Head width of Tongue Rail & Gap Avoiding
Rail 91mm (±1 mm)

9

Flange width of Tongue Rail & Gap
Avoiding Rail 169 mm (+0.1 mm)

10

20 R of Tongue rail (Head & Foot)

11

43R of Tongue Rail, Stock Rail & Gap
Avoiding  rails

12

3/378 slope at Stock rail & Tongue
Rail end- by gauge

13

Top slope of Gap avoiding Rail (6 mm)- by gauge

14

Check Rail hole spacing -as per drawing

15

Bolt holes height in Check Rail 79 mm
(±1 mm)

16

28 Dia. Holes in Check Rail- ok

17

Check Rail Head machining (30 mm)

18

Matching of Tongue & Stock Rails- 0.5 filler gauge not to be pass

19

End squareness Tongue & Stock Rails- Right angle

20

Conditions of C.I Chairs / M.S.Brackets- good

21

Surface roughness value upto 3-7 micron

22

Alignment – ok

23

Conditions of C.I.Chairs / M.S.Bracket /
Plate Screw / Bolt & Nut / H.T.S Bot with nuts / Hardened Washer / Single
coil spring washer- ok

Leave a Comment